Table of Contents
Advertisement
Master Programming Level
See Page
BANNER
1=FACTORY
2=USER DEFINED
Banner Screen
MS-9200UDLS PN 52750:A 11/04/05
3.6.5.1 Trouble Reminder
The Trouble Reminder features causes the control panel piezo to sound a reminder
'beep' for alarms and troubles, after the panel has been silenced. Refer to "System
Setup" on page 80, for a detailed description of this feature. Pressing 1 while
viewing System Setup Screen #1 will cause the display to toggle to Trouble Rem
On, which enables this feature. Each press of the 1 key will cause the display to
toggle between Trouble Rem On and Trouble Rem Off.
3.6.5.2 Banner
The top line of the display, which appears when the control panel is in normal mode,
can be changed by using the Banner option. Pressing 2 while viewing System Setup
Screen #1 will cause the following to be displayed:
1=FACTORY
2=USER DEFINED
Banner Screen
Pressing 1 while viewing the Banner Screen will select the factory default banner
setting and display the following screen:
FACTORY BANNER
HONEYWELL LIFE SAFETY
Factory Banner Screen
Pressing the Enter key will store this selection in nonvolatile memory and return the
display to the Banner Screen.
Pressing 2 while viewing the Banner Screen will cause the following screens to be
displayed:
USER DEFINED BANNER
PRESS ENTER IF OK
User Defined Banner Screen #1
USER BANNER - LINE 2
PRESS ENTER IF OK
************
User Defined Banner Screen #2
These screens allow the programmer to enter a two line custom banner. A flashing
cursor will appear in the bottom left corner of each display. A maximum of 20
characters (including spaces) can be entered into each screen for a total of two lines
with 40 characters. After entering up to 20 characters in the first screen, press Enter
BANNER
Programming
81
Advertisement
Table of Contents
