Controls And Indicators - Honeywell Fire-Lite Alarms ES-50X Manual

Product Description
The following figure illustrates the maximum current that is possible for each major panel output circuit and the total current available from
the FACP.
Remote Synchronization

1.3 Controls and Indicators

LCD Display
The FACP uses an 80-character
(4 lines X 20 characters) high viewing angle LCD display. The display includes a long life LED
backlight that remains illuminated. If AC power is lost and the system is not in alarm, the LED
backlight will turn off to conserve batteries.
Key Panel
Mounted on the main circuit board, the key panel includes a window for the LCD display and
LED indicators as listed below. The key panel, which is visible with the cabinet door closed, has 30 keys, including a 16 key alpha-numeric
pad similar to a telephone keypad.
14
TB11
Special Application
Nonresettable or
Resettable Power
NAC #1
TB5
NAC #2
TB8
Output
Refer to the battery calculations section for additional information.
Figure 1.1 Current Availability
Standby
1.0 amp max
2.0 amps max
per circuit
per panel
2.5 amps max
per circuit
2.5 amps max
per circuit
0.35 amp max
per circuit
ES-50X Series Manual — P/N LS10129-000FL-E:D 4/26/2021
Controls and Indicators
Alarm
3.0 amps max
per panel
SYSTEM NORMAL
10:00A 010118