Checking Memory Information - Fujitsu M10-4 Service Manual

Install it by observing the mounting configurations shown in either
8-2.
Table 8-3 Memory mounting configurations (CMUL and expanded CMUU)
Number of Mounted memory
memory
modules
8 a in
Figure 8-3
16 a in
Figure 8-3
24 a in
Figure 8-3
32 a in
Figure 8-3
40 a in
Figure 8-3
48 a in
Figure 8-3
56 a in
Figure 8-3
64 a in
Figure 8-3
8.2.2

Checking memory information

Check the type and size of the memory by using the showhardconf command of the
XSCF firmware.
1.
Log in to the XSCF shell.
2.
Execute the showhardconf command to check the memory information.
The capacity and rank of the memory are displayed.
XSCF> showhardconf
------------------------ Ommitted ------------------------
MBU Status:Normal; Ver:2086h; Serial:TZ1249M00C ;
+ FRU-Part-Number:CA07363-D001 A0 /7060744 ;
+ Power_Supply_System: ;
+ Memory_Size:64 GB; Type: A ;
CPU#0 Status:Normal; Ver:4142h; Serial:00325040;
+ Freq:2.800 GHz; Type:0x10;
+ Core:16; Strand:2;
MEM#00A Status:Normal;
+ Code:2c800118KSF1G72PZ-1G6E1 4531-B1F92ED5;
+ Type:04; Size:8 GB;
MEM#01A Status:Normal;
-
b in -
Figure 8-3
b in e in
Figure 8-3 Figure 8-3
b in e in
Figure 8-3 Figure 8-3
b in e in
Figure 8-3 Figure 8-3
b in e in
Figure 8-3 Figure 8-3
b in e in
Figure 8-3 Figure 8-3
b in e in
Figure 8-3 Figure 8-3
- -
- -
f in Figure -
8-3
f in Figure c in
8-3 Figure 8-3
f in Figure c in
8-3 Figure 8-3
f in Figure c in
8-3 Figure 8-3
f in Figure c in
8-3 Figure 8-3
Chapter 8 Maintaining the Memory
Table 8-3or
- -
- -
- -
- -
d in -
Figure 8-3
d in g in
Figure 8-3 Figure 8-3
d in g in
Figure 8-3 Figure 8-3
Table
-
-
-
-
-
-
h in
Figure 8-3
177