Fujitsu M10-4 Service Manual page 138

Figure 7-24 Releasing a connected XSCF board (for the SPARC M10-4S with a
4.
Pull out the XSCF board diagonally to the right (arrow).
Note - Place the removed XSCF board on a grounded antistatic ESD mat.
Figure 7-25 Pulling out an XSCF board (for the SPARC M10-4 with a FRAME-A
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
114
FRAME-A CPU memory unit)
A
CPU memory unit)