Fujitsu M10-4 Service Manual page 46

Table 2-4 Functions of the power switch
Icon Operation
Brief press
(For 1 second or
more and less than 4
seconds)
Long press
(For 4 seconds or
more)
*: If the system has been started, it means that at least one physical partition has been powered on.
Table 2-5
Table 2-5 Functions of the mode switch
Function
Starting/Stopping the system
by the power switch
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
22
Description
If the system has been
started in Service mode (*):
If the system is stopped in
Service mode:
If the system has been
started in Locked mode (*):
If the system is stopped in
Locked mode:
If the system has been
started in Service mode (*):
If the system startup
process is in progress in
Service mode:
If the system stop process
is in progress in Service
mode:
If the system is stopped in
Service mode:
If the system is stopped in
Locked mode:
If the system is not
stopped in Locked mode:
describes the functions of the mode switch.
Locked
Only system startup is enabled.
Operation is ignored.
Operation is ignored.
Operation is ignored.
Starts the system.
At this time, if a wait time for the air conditioning
facilities or a warm-up time is set on the XSCF,
the processing for waiting for the power-on of the
air conditioning facilities and the completion of
warm-up is omitted.
Perform the system shutdown process to stop the
system.
Cancels the system startup process and then
stops the system.
Continues the system stop process.
Operation is ignored.
Even a long press does not start the system.
Starts the system.
If a wait time for the air conditioning facilities or
a warm-up time is set on the XSCF, the
processing for waiting for the power-on of the air
conditioning facilities and the completion of
warm-up is omitted.
Operation is ignored.
Mode switch
Service
A long press
shuts down the
system.