Fujitsu M10-4 Service Manual page 27

The system name plate label (A in the figure) describes the model number, serial
■
number, and version required for maintenance and management.
The standard label (B in the figure) describes the following certification standards.
■
The warning label on the crossbar box describes certification standards.
SPARC M10-4/M10-4S
Safety: NRTL/C
■
Radio wave: VCCI-A, FCC-A, DOC-A, KCC, and C-Tick
■
Safety and radio wave: CE, BSMI, and GOST-R
■
Crossbar box
Safety: NRTL/C
■
Radio wave: VCCI-A, FCC-A, DOC-A, KCC, and C-Tick
■
Safety and radio wave: CE and CU
■
Figure 1-3 Location of the system name plate label and standard label (SPARC
M10-4/M10-4S)
B
Figure 1-4 Location of the system name plate label and warning label (crossbar
box)
A
A
B
Chapter 1 Before Starting Maintenance Work 3