Fujitsu M10-4 Service Manual page 337

Note - In the case of a dual power feed, connect the power cords in their original positions by
referring to the record that you made before the start of maintenance.
2.
Return to the operation of the XSCF firmware replacefru command to confirm
that the XSCF unit has been incorporated into the system.
For details, see "6.1.2 Incorporating an FRU of the crossbar box into the
3.
Start all the physical partitions.
For details, see "6.3 Powering On the Physical Partition Requiring
4.
Close the rack door.
Chapter 17 Maintaining the XSCF Unit of the Crossbar Box
system."
Maintenance."
313