Figure 28-15 Removing the cables
6.
Loosen the three screws securing the fan shelf and partially pull out the fan
shelf.
Figure 28-16 Removing the fan shelf
7.
Place a hand under the fan shelf to support it and then carefully remove it
from the chassis.
Note - Remove the fan shelf while paying careful attention to the two cables arranged in the
center.
Note - Place the removed fan shelf on a grounded antistatic ESD mat.
8.
Remove the cable connecting the fan backplane from the connector.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
430