Data Connection To Pc; Data Recording With Pc Software Ecom-Das Nt 2 - Ecom EN3 Instruction Manual

To select the correct data logger file use the date identification:
J2KDL-00.csv -- älteste Datei
J2KDL-01.csv
J2KDL-02.csv
J2KDL-XX.csv -- neueste Datei

10.3 Data connection to PC

If the device is connected to a PC, measured values and plant data can be
synchronized with a PC software from ecom.
The following software solutions are available:
• ecom-DAS NT 2 (10.3.1)
• ecom-DAS 5 (10.3.2)
• PC-software (10.3.3)

10.3.1 Data recording with PC Software ecom-DAS NT 2

In addition to data logger recordings the data could also be transferred online
via USB or AUX to the software "ecom-DAS NT 2".
The following interfaces can be used for communication with the software:
• USB
• AUX-Schnittstelle = RS232
• Bluetooth (option)
NOTE
A driver is required to communicate with the PC software DAS NT 2
via the USB interface. To download and install the necessary USB
driver, see https://www.ecom.de/en/downloads.
ecom-EN3 Page 57