Air Leak Test - Ecom EN3 Instruction Manual

• remove the plastic sleeve from the old paper roll
• insert the beginning of the paper roll into the gap provided below the
transport roll. The inside of the new roll must be at the front.
• feed the paper about 3 cm through the printer. To do this, navigate to the
"Adjustments / Paper feed" function and press <Enter>
• place the paper roll in the recess provided for it
• feed the paper through the printer compartment cover
• close the printer compartment with the cover
1
2
3
Tab of the printer cover
1

11.4 Air leak test

An air leak test can be carried out in order to rule out the possibility of leaks,
damage and leaks in the system.
The instrument performs the tightness test procedure to check for leaks in
probe, probe tubing or gas path.
NOTE
Carry out the air leak test at regular intervals to ensure that there are
no leaks in the instrument which could falsify the measured values.
To start the air leak test, navigate to the Adjustments menu and select the
air leak test.
Page 64
Printer cover
2
Paper roll
3
ecom-EN3