Option Interface Wi-Fi (Wlan); Interface Ble (Bluetooth Low Energy) - Ecom EN3 Instruction Manual

Intelligent analysis

Hide thumbs Also See for ecom EN3:

Table of Contents

1.10. Option Interface Wi-Fi (WLAN)

If the instrument is equipped with the Wi-Fi option, this interface can be used

to display the current measured values in the App "ecomMander" of ecom.

The following functions can be used in the App:

• live display of current measured values

• export of stored measured values as * .pdf or * .csv

• activate the function "Print measured values" on the measuring instrument

• activate the function "fresh air purge CO sensor" on the measuring instru-

ment

NOTE

For the start-up of the Wi-Fi interface and for further information on

the corresponding settings, please refer to the chapter "Adjustments".

The device is equipped with BLE, so this interface can be used to display the

current measured values in the App "ecomMander" of ecom. The following

functions can be used in the App:

• Live display of current measured values

• Export of stored measured values as * .pdf or * .csv

• Activate the function "Print measured values" on the measuring instrument

• Activate the function "fresh air purge CO sensor" on the measuring instru-

ment

NOTE

For the start-up of the BLE interface and for further information on the

corresponding settings, please refer to the chapter "Adjustments".

Page 16

ecom-EN3

Table of Contents

Do you have a question about the ecom EN3 and is the answer not in the manual?