Ecom EN3 Instruction Manual page 36

The settings for „Printer" can be changed as follows:
• select menu point and confirm with <Enter>
• select desired adjustment with cursor keys
• confirm with <Enter>.
The setting for „Store" can be changed as follows
• select menu point and confirm with <Enter>
• activate memory function with <F1> or
• deactivate it with <F4>
By "Start measurement" / <Enter> the evaluation of the measurement values
will be started. On the display the actual mean values will be shown (will be
updated with new measurement values / switch to the actual values with cur-
sor keys <up/down>).
O2 3.2 %
CO2 13.1 %
CO
Eff. 92.5 %
Losses 7.5 %
Exc.air 1.18
T.Gas 184 °C
T.Air 20 °C
Mean value
15:35min
Page 36
It is possible to scroll through the values with
the cursor keys <right/left>. With <F2> you can
0 ppm
interrupt and with <F4> stop the measurement.
After finishing the measurement time a protocol
of the results with all mean values can be
printed (key <Print>).
ecom-EN3