Data Recording With Ecommander App - Ecom EN3 Instruction Manual

To export data from the instrument to a PC software, proceed as follows:
• connect ecom-EN3 and PC via USB cable (if the connection is correct,
"USB" appears in the lower right corner of the display)
• select "Send data" and confirm with <Enter>
• answer the displayed question with YES (<F1>)
• start the data transfer on your PC

10.4 Data recording with ecomMander App

To display and storage of measured values, the App "ecomMANDER" for
smartphones is available. The following operating systems are supported by
the App:
• iOS
• Android
If the instrument is connected to the App via WiFi or BLE, the current
measured values of the instrument can be displayed directly in the App. The
measured values can be saved and exported together with the customer
information to be entered. These exported data can be sent for example by
e-mail.
The following file formats can be exported:
• *.pdf
• *.csv
To enable communication via WiFi with the App "ecomMander", the follow-
ing settings must be made in the Adjustments / Internal / WLAN menu:
Parameter
Access Point
Auto Connect
Page 60
Meaning Adjustment
Access Point
Yes
ecom-EN3