ENGINEERING TOMORROW
9.5
EXECUTE SPOOL AUTO-CALIBRATION FROM THE PLUS+1 SERVICE TOOL
Open the PLUS+1 service tool and execute the matching .P1D.-file (SW in PVED-CLS needs to match the pages in the
.P1D-file).
pages
In the system navigator
-
Figure 26
Spool Calibration Mode
Important
Start spool calibration -button, the operator has to activate the steering otherwise it will not engage
the spool calibration. See description for P3801 in section 9.3.1.1
Important
The wheels of the machine need to be in a straight ahead position (within value for Spool calib +/- turn range sweep;
P3804), in order to start the spool auto-calibration routine.