Danfoss PVED-CLS User Manual page 87

ENGINEERING TOMORROW
1100
1000
900
800
700
600
500
400
300
200
100
0
0 100
The range is from 100 to 1000 [IR] for P3708 (i.e. relative soft-stop flow limit).
The range is from 0 to 1000 [IR] for P3710 and P3712 (i.e. relative wheel angle).
The Danfoss recommended values are P3708 set to 200, and P3710 and P3712 set to 0.
Important
For wheel angles lower than the one specified at Point A, maximum flow is available.
Important
If soft-stops are not needed, the operator can eliminate those by setting P3708 to 1000.
Name
AUX Soft-stop max flow
P3708 U16
@ cylinder end-stop
AUX Soft-stop wheel
P3710 U16
angle region start
AUX - open loop soft-stop
200 300 400 500
Description of parameter
IR Oil flow to deliver at the max possible wheel angle
Defines the wheel angle region start, from the max possible wheel angle
IR
towards 0, in which the soft stop has to be applied
600 700 800
|Wheel angle [IR]|
Figure 42
Point A
Point B
900 1000 1100 1200
Range
OEM 100 1000
OEM 0 1000
1300
200
0