Software Parameter Set-Up Service Tool Interface; Limit Drum Speed; Tmc System Overview - Danfoss PLUS+1 Technical Information

Transit mixer controller

Hide thumbs Also See for PLUS+1:

Table of Contents

Technical Information

Software Parameter Set-up

Service Tool

Interface

Transit Mixer Controller (TMC)

This screen shows an overview of the system, inputs to the application and output signals to the

drum. It also shows what system (as set by the configuration pins) is connected: 0, 1, 2, or 3. There are

also hyperlinks to parameter settings and the log page. If system 1 is connected it takes you to the

system 1 parameter setting.

This screen is a simple flow chart of the system where you can follow a signal from input to

output. Most of the images are hyperlinked to parameter setting pages.

11061324 • Rev CA • Sep 2013

Table of Contents

Need help?

Do you have a question about the PLUS+1 and is the answer not in the manual?