Introduction
This manual is intended for professionally trained operators of Christie high-brightness CP2308-C
projection systems.
Only Christie qualified technicians who are knowledgeable about the hazards associated with high-
voltage, ultraviolet exposure, and the high temperatures generated by the projector are authorized to
assemble, install, and service the projector.
For complete production documentation and technical support, go to www.christiedigital.com.
Projector components - front
Learn about the components on the front of the projector.
A
Touch panel
A touch-sensitive screen used to control the
projector.
B
Communications panel
External devices are connected here.
C
Adjustable feet
Turn the adjustable feet to increase or
decrease the projector height.
CP2308-C Installation and Setup Manual
020-102492-01 Rev. 1 (01-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
E
Air filter cover and air filter
Located behind the air filter cover is a
replaceable air filter.
F
Projector lens
A list of available lenses is available in the
projector specifications.
G
Lens surround
7