6.2.5.
Controls
System Controls Screen
Press the "Control" button on the main menu bar to display the "System Control" screen.
From this screen, you can control online operation, transfer to bypass, shutdown and load off
commands. In addition, this screen can display the current status of the UPS, indicating whether
Figure 6-19
the UPS is in "online mode" or "bypass mode".
shows the System Status screen.
Figure 6-19: System Controls Screen
UPS Controls Screen
This screen can control the charger, battery test and UPS status.
Figure 6-20: UPS Controls Screen
96
Copyright © 2021 Eaton Corporation plc. All rights reserved.