Module Control
Figure 6-21
system and display the value and status of each UPM.
Figure 6-22
previous screen (Figure 7-33), the user can observe full details of an individual module. It also
allows the user to move through various modules and modes while within this screen.
Select the "Turn On Charger" button, there will be a pop-up screen to confirm the request.
Copyright © 2021 Eaton Corporation plc. All rights reserved.
Screen
s
shows the Module Controls screen. This screen can control each module in the
Figure 6-21: Module Controls Screen
shows the Module Control screen. By selecting any of the modules shown on the
Figure 6-22: Module Control Detail Screen
Figure 6-23: Turn On Charger confirmscreen
Eaton 93PR 60-1200 kW UPS
Installation and Operation Manual
97