Connect The Signal Cables Of Sync; Table 4-3: Signal Cables Connection Of Sync - Eaton 93PR Installation And Operation Manual

4.2.1.3.
1. If Sync is selected, need to connect the signal cables between the primary cabinet and the
secondary cabinet. Detail please see
2. Proceed to Section

Table 4-3: Signal Cables Connection of Sync

Sync Cable
Sync bypass IP fuse
Sync terminal block
Copyright © 2021 Eaton Corporation plc. All rights reserved.

Connect the Signal Cables Of Sync

4.7.2 .
Primary
Cabinet
Cable Mark
SYNC
P6
Table 4-3
;
Secondary
Secondary Cabinet
Cabinet
Cable
Cable Mark
SYNC Bypass Input
P6 MCU PCBA
Eaton 93PR 60-1200 kW UPS
Installation and Operation Manual
Position
Rear
Rear
59