Ce Marking; User Precautions - Eaton 93PR Installation And Operation Manual

1.1. CE Marking

The product has the CE marking in compliance with the following European directives:
• LV Directive (Safety) 2014/35/EU
• EMC Directive 2014/30/EU
Declaration of conformity with UPS harmonised standards and directives EN 62040-1 (Safety) and EN
62040-2 (EMC) are available at http://powerquality.Eaton.com or by contacting your nearest Eaton office
or authorized partner.

1.2. User Precautions

The only user operations permitted are:
• Start up and shut down of the UPS, excluding the commissioning start up.
• Use of the HMI control panel.
• Use of optional connectivity modules and their software.
The user must follow the precautions and only perform the described operations. Any deviation from the
instructions could be dangerous to the user or cause accidental load loss.
WARNING
The user is not permitted to open any screws excluding connectivity plates and the MBS locking
plate. Failure to recognise the electrical hazards could prove fatal.
CAUTION
• The 93PR series models are available as C2 UPS product which can be placed both in
a residential and commercial/industrial environment. When included in a residential
environment, this product may cause radio interference, in which case the user may be
required to take additional measures.
• By standard, the 93PR series models are category C3 UPS products, meant for all commercial
and industrial establishments.
2
Copyright © 2021 Eaton Corporation plc. All rights reserved.