Intelligent Power Software; Signal Input Monitoring; General Purpose Relay Contact - Eaton 93PR Installation And Operation Manual

5.2. Intelligent Power Software

Intelligent Power Software are productivity tools for UPS power management. The Intelligent Power
Protector (IPP) application provides automatic, graceful shutdown of computers and virtual machines or
servers powered by an Eaton UPS during a power outage that lasts longer than your available battery
runtime. Intelligent Power Protector can be remotely supervised and managed by the Intelligent Power
Manager (IPM) application. The IPM delivers a global view of power devices across the network from any
PC with an Internet browser. The software enables single, Web-based interface for remote monitoring and
management of Eaton and other manufacturers' UPSs, environmental sensors and Power Distribution
Units (ePDU) products, even in virtualized environments.
You can download it from the EATON web page.

5.3. Signal input Monitoring

This standard feature lets you connect the UPS to your signal inputs, such as on generator, charger on/off
control, UPS on/off controls alarms. The customer interface terminals for external connections are located
inside the UPS. You should use twisted-pair wires for each alarm input and common.
The signal inputs can be programmed to display the functional name.

5.4. General Purpose Relay Contact

One general purpose relay contact is provided as a standard feature on the UPS. An alarm contact is also
provided. You can use a normally-closed or normally-open contact. If the state of the contact changes
from the state you specify as normal, a signal is issued. You can connect this contact to equipment at your
facility (such as a light or an alarm bell) to let you know when an alarm is active on the UPS. This feature
is useful if the UPS is located in a remote area where the UPS horn may not be heard immediately.
NOTE
Contacts should not be operated in excess of 30 Vac (RMS) and 30 Vdc at 5 A maximum.
Copyright © 2021 Eaton Corporation plc. All rights reserved.
Eaton 93PR 60-1200 kW UPS
Installation and Operation Manual
83