Logs; Figure 6-33: System Events Screen - Eaton 93PR Installation And Operation Manual

6.2.7.

Logs

System Events Main Screen
When the UPS system is running in Online mode, it will continuously monitor whether the UPS
has alarms. In Battery or Bypass modes, the UPS may issue alarms to display exactly what
event caused the change from Online mode. System events on the UPS can be indicated by
horns, lights, messages, or all three. See
System Log
In Battery or Bypass Modes, the UPS may issue alarms to let you know exactly what event
caused the change from Double Conversion Mode. System events on the UPS can be indicated
by horns, lights, messages, or all three.
Select Logs from the main menu screen to look at any currently active events.
• System Event Horn - The system event horn beeps to alert an operator that an event
needing attention is taking place.
• System Event Indicators - The status indicators on the UPS control panel and the event
horn let you know when the UPS system is operating in any mode other than Double
Conversion Mode. Only the Normal indicator is visible during normal UPS system operation.
The other indicators illuminate to indicate alarms or events (see
occurs, first check these indicators to see what type of event has taken place.
• System Event Messages - When a system event occurs, a message appears in the status
bar of the display. This message is also written to the Active Events log. Some notices and
alarms may be accompanied by an audible horn. To silence the horn, press any button once.
Copyright © 2021 Eaton Corporation plc. All rights reserved.
Figure 6-33

Figure 6-33: System Events Screen

Eaton 93PR 60-1200 kW UPS
Installation and Operation Manual
.
). When an alarm
Table 6-1
101