Figure 55. Define parameters step.
Additional information about the protocol is also displayed on the screen, e.g. references into the
respective kit handbook with respect to storage, handling, and pretreatment (if required).
Note: Ensure you have read the respective information in the kit handbook.
To proceed to the Select sample positions step, tap Next.
To return to the previous screen, tap Back.
To cancel the protocol, tap Cancel.
5.4.5
Selecting sample positions
To select the positions of your samples, tap the relevant rows on the worktable diagram or tap the
corresponding row numbers underneath the diagram. The selected positions are highlighted. To
select or deselect all positions, use the Select all toggle.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021
84