Qiagen EZ2 Connect User Manual page 77

Configuring a Wi-Fi connection
Note: Only administrators can configure Wi-Fi settings.
Note: Make sure the Wi-Fi USB device was plugged-in before the machine was started.
The EZ2 can be connected to a Wi-Fi network using the Wi-Fi adapter inserted into one of the USB
ports. The Wi-Fi adapter supports the 802.11b, 802.11g, and 802.11n Wi-Fi standards, and
WEP, WPA-PSK, and WPA2-PSK encryption.
The SSID of the network must be visible. It is not possible to connect to a network with a hidden
SSID.
To configure the Wi-Fi connection, follow the steps below:
1. Tap the Configuration icon on the toolbar and tap the Tap Wi-Fi tab.
Figure 47. The Wi-Fi tab.
2. To search for available networks, tap Scan. The signal strength, encryption type and name of
each network is shown.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021 77