Changing Instrument Settings - Qiagen EZ2 Connect User Manual

Figure 31. Select date dialog.
4. To set the time, tap the Time field and enter the time using the on-screen keyboard.
5. To set the date format, tap the Date format drop-down list and select one of the listed formats.
6. To use the 24-hour time format, select the 24-hour time format checkbox. To use the 12-hour
for-mat, clear the 24-hour time format checkbox.
7. To set the time zone automatically using the QIAsphere Base connection, select the Set time
zone automatically checkbox.
Note: This setting requires an active QIAsphere Base connection. For more information on
configuring QIAsphere Base, refer to Configuring QIAsphere Base. If QIAsphere Base is not
configured, the Set time zone automatically checkbox is disabled.
8. To save the settings, tap Accept.
5.3.2

Changing Instrument settings

You can adjust the settings of the EZ2 according to your preferences.
Note: Only Administrators can change Instrument settings.
To modify Instrument settings, follow the steps below:
1. Tap the Configuration icon on the toolbar and tap the Instrument settings tab.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021 63