Rj-45 Ethernet Port And Power Cord Socket - Qiagen EZ2 Connect User Manual

3.2.4

RJ-45 Ethernet port and power cord socket

The RJ-45 Ethernet port is located on the back of the instrument. The port is used to connect the EZ2
to a local area network. See image below highlighted in white.
The power cord socket is located on the back of the EZ2 and is used for connecting the instrument
to a power outlet via the supplied power cord. See image below highlighted in blue.
Figure 5. Location of RJ-45 port and power cord socket.
WARNING Electrical hazard
Any interruption of the protective conductor (earth/ground lead) inside or
outside the instrument or disconnection of the protective conductor terminal is
likely to make the instrument dangerous.
Lethal voltages inside the instrument
When the instrument is connected to line power, terminals may be live and
opening covers or removing parts is likely to expose live parts.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021 30