Qiagen EZ2 Connect User Manual page 97

3. When the run is aborted, the instrument finishes the current movement, and then attempts to
dispense the contents of the pipettes into an empty tube, and to release tips into empty tip
holders. Then, the worktable returns to its initial position. After this is done, a message is
shown and the Proceed to the summary button is activated. Tap Proceed to the summary.
Note: If you tap Abort during a pause or when the machine is waiting to reach a specific
temperature, the run is stopped immediately.
Figure 70. Protocol run interrupted dialog.
4. Tap Finish to end the run and go back to the Home screen. A run report is generated. For
more information on how to save a run report, refer to the Saving a run report section.
Figure 71. Protocol run aborted screen.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021 97