Configuring QIAsphere Base connection
For information on how to configure QIAsphere Base, refer to the QIAsphere Base user manual.
For more details on the QIAsphere Base network configuration and how to connect both devices
with each other, refer to the QIAsphere Base user manual which is available at www.qiagen.com.
Only users assigned the role Administrator can change the network configuration. It is
recommended to consult your network administrator when configuring the network. For
communication with QIAsphere Base, the outbound TCP port 443 (https) is used; ping is supported.
1. Tap the Configuration icon on the toolbar and tap the QIAsphere tab.
Figure 51. The QIAsphere tab.
2. Enter the QIAsphere Base URL.
3. Enter the QIAsphere Base password.
4. Tick the Enable QIAsphere communication box.
5. Tap Accept.
6. Tap Test connection.
Note: If you have any trouble regarding the QIAsphere, please use the QIAsphere Base user manual
or contact the QIAGEN support.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021
80