Installation Of External Barcode Scanner (Optional); Installation Of Wi-Fi Adapter (Optional When Using Qiasphere); Initial Configuration Of The Ez2 - Qiagen EZ2 Connect User Manual

4.3.3

Installation of external barcode scanner (optional)

1. Remove the barcode scanner from the box.
2. Before powering on the instrument connect the barcode scanner to any one of the 3 USB ports
located either on the front of the instrument or on the rear of the touchscreen.
WARNING Risk of personal injury
Hazard Level 2 laser light: Do not stare into the light beam when using handheld
bar code scanner.
4.3.4

Installation of Wi-Fi adapter (optional when using QIAsphere)

1. Remove the Wi-Fi adapter from the packaging
2. Before turning on the instrument, plug the Wi-Fi adapter into one of the 3 USB ports located
on either the front of the instrument or on the rear of the touchscreen.
Note: It may be more convenient to use the USB ports on the rear of the touchscreen.
4.3.5

Initial configuration of the EZ2

1. Follow steps 1 to 5 from the Starting the EZ2 section.
2. To log in for the first time, enter Admin in both User ID and Password fields then press Log in.
After this login, you will have administrator rights with the option to set up other users. Refer to
the Managing users section for further details.
Note: After first log in using the Admin account, the password should be changed according
to the Password policy described in the Managing user security section and as per instruction
in the Changing password section.
3. From the Configuration menu under the System tab, you can modify the Device Name, Date
and Time fields. You also find information on Software version, Serial number, and Firmware
version. For further details, see the Setting basic system data section.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021 48