Qiagen EZ2 Connect User Manual page 14

To ensure satisfactory and safe operation of the EZ2, follow the advice below:
The line power cord must be connected to a line power outlet that has a protective conductor

(earth/ground).
Place instrument in a location so that the power cord is accessible and can be

connected/disconnected.
Use only the power cord delivered by QIAGEN.

Do not adjust or replace internal parts of the instrument.

Do not operate the instrument with any covers or parts removed.

If liquid has spilled inside the instrument, switch off the instrument, disconnect it from the

power outlet, and contact QIAGEN Technical Services for advice before attempting
troubleshooting or service activity.
If the instrument becomes electrically unsafe, prevent other personnel from operating it and contact
QIAGEN Technical Services.
The instrument may be electrically unsafe when:
The EZ2 or the line power cord appear to be damaged.

The EZ2 has been stored in unfavorable conditions for a prolonged period.

The EZ2 has been subjected to severe transport stresses.

Liquids have come into direct contact with electrical components of the EZ2.

The power cord has been exchanged with a non-official power cord.

WARNING Electric hazard
Do not touch the EZ2 with wet hands.
WARNING Electric hazard
Never install a fuse different from that specified in the user manual.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021 14