Table of Contents
Advertisement
LinMot
5.7.4 Verifying parameter settings
Check Configuration
5.7.5 Printing parameter sets
User Manual V1.01
The visibility of some parameters can depend on the settings of other parameters. For
example, the initialization mode "Trig Turn Left" would only be visible if a stepper
motor had been chosen as the "Drive Type". When the user changes motor type it
cannot be guaranteed that the correct initialization mode will be automatically selected.
In order to quickly discover errors in the parameter configuration, a program function
that checks the parameter configuration automatically is integrated. This function is
called by clicking on the "Check Configuration" button. An incorrect or missing
parameter setting is marked and displayed so that it can be corrected by the user.
Subsequent clicking on the "check Configuration" button causes the display of the next
incorrect parameter, or a message informing that the parameter configuration is
consistent.
The print process is initiated by clicking the "Print" button. If desired, only a single
parameter set can be printed by selecting it.
print only selected parameter set
print all parameters
Configuration Software
Figure 5-7: Printing parameters
5-8
Advertisement
Table of Contents
