Actuator Interfaces; Connection Of Linmot  P Linear Motors - LinMot Step User Manual

Table of Contents

Advertisement

   
LinMot

4.6 Actuator interfaces

4.6.1 Connection of LinMot
E100/E200/E400
E1000/E2000/E4000
User Manual V1.01
The interfaces for the connection of the actuators are found on the front of the electronic
unit and are named Mot A, Mot B, Mot C and Mot D.
Caution: The pin configuration for the actuators of the two electronic unit series
E100/E200/E400 and E1000/E2000/E4000 are not identical. The incorrect connection
of an actuator can lead to damage of the electronic unit and of the actuator itself.
   
P linear motors
The sensor signals and the power signals of the linear motors of the LinMot
carried on a single cable.
®
By default the LinMot
drives come factory-fitted with a cable. In cases where a longer
cable is necessary, the cable can be extended up to 50m (see data book). Only the
special LinMot cable (Art. No. 0150-1920) must be used for extension cables.
9-pole D-Sub connectors are available on the front of the electronic units of the
E100/E200/E400 series for connecting the actuators.
Pin
1
2
3
4
5
6
7
8
9
Table 4-4: E100/E200/E400 pin configuration for the LinMot
Only the special LinMot cable (Art. No. 0150-1920) must be used for extension cables.
In applications where the motor cable has to be or moved during operation, the special
trailing chain cable (Art. No. 0150.1927) must be used (max. 10m).
10-pole Mini-Combicon connectors are available on the front of the electronic units of
the E1000/E2000/E4000 series for connecting the actuators.
Pin
1
2
3
4
5
6
7
8
9
10
Table 4-5: E1000/E2000/E4000 pin configuration for the LinMot-P
The lower bit of the motor connector has the pin number 1 (with the unit upright). The
pins are numbered from bottom to top.
Design and Installation
Color
Signal
red
Phase 1 +
blue
Phase 2 +
white
+5V
yellow
Sensor Sin
black
Temperature Sensor
pink
Phase 1 -
gray
Phase 2 -
brown
Ground
green
Sensor Cos
Color
Signal
red
Phase 1 +
pink
Phase 1 -
blue
Phase 2 +
gray
Phase 2 -
white
+5V
brown
Ground
yellow
Sensor Sin
green
Sensor Cos
black
Temperature sensor
Shield
4-18
P series are
   
P

Advertisement

Table of Contents
loading

This manual is also suitable for:

MagnetPE

Table of Contents