Table of Contents
Advertisement
LinMot
Signals supply
Power supply
4.7.2 E1000/E2000/E4000 supply
User Manual V1.01
Table 4-6: Supply pin configuration E100/E200/E400
Input voltage:
Max. input current:
The linear motors reach their maximal force and full dynamics only when supplied with
a 48V DC power supply (see data sheets of the linear motors).
Input voltage:
The required power strongly depends on the loading of the motors. For an optimal
design of the power supplies the power requirements of each application should be
clarified individually.
Practical applications have shown that in most cases, even when driving four linear
motors LinMot
P at the same time with one E400 electronic unit a power supply of
48V/300W is sufficient.
In the electronic units of the E1000/E2000/E4000 series the signal circuitry and the
power circuitry are supplied over two separate connectors that are found on the front of
the unit. As the supply voltage ranges for the two circuits are different, the only case in
which they can be supplied from a single power supply is when they are operated at
48V.
Figure 4-17: Installation of the E1000/E2000/E4000 electronic unit
In order to guarantee safe operation, the electronic units must be connected according to
the figure.
Pin
Signal
top
+Vcc Signal supply
middle
GND
bottom
+Vcc Power supply
24 - 48V DC
160 mA (at 24 V)
24 - 48V DC
4-21
Design and Installation
Advertisement
Table of Contents
