Configuration Software; Installation Requirements - LinMot Step User Manual

Table of Contents

Advertisement

   
LinMot

5. Configuration Software

'Control Panel'
'Parameter Inspector'
'Curve Inspector'
'Oscilloscope'
'Error Inspector'

5.1 Installation requirements

User Manual V1.01
®
The LinMot
Talk software is a MS-Windows based software designed to support the
user in commissioning and configuring the LinMot
features a powerful, modular graphical interface that covers all the tasks involved with
the operation of the LinMot
development of the interface in order to make it easy to upgrade and comfortable to
operate. The five main modules of the software are described shortly in the following
text. A detailed description is found in the following chapters.
With the 'Control Panel' the user can start and stop the software on the electronic unit.
The electronic unit can also be reseted from here, and new software can be downloaded.
With the 'Parameter Inspector' the parameters of the LinMot
changed easily. Complete parameter sets can be saved, loaded and printed.
The 'Curve Inspector' is used to generate and manage reference curves for the LinMot
Electronic. Existing curves can be loaded, saved, merged and printed. New curves can
be created in a simple way.
The 'Oscilloscope' helps the user commissioning the LinMot
time recording, subsequent on-screen viewing and printing of internal variables, like for
example position set value and actual value.
With the 'Error Inspector' the user has the possibility to display the error log as well as
the actual pending warnings and errors of the LinMot
The requirements for the installation of the LinMot
the following table:
Resource
computer
free memory
graphic card and monitor
operating system
pointing device
free interfaces
disc drives
®
electronic unit. Great care has been taken during the
Minimal requirement
A personal computer with
80386 processor
RAM:
8MB
Harddisk: 4MB
VGA graphic card and
15" monitor
Windows compatible mouse
serial RS232 interface
3½" disc drive
Table 5-1: Installation requirements
5-1
Configuration Software
®
electronic unit. The software
®
electronic unit can be
®
system. It allows real-
®
electronic unit.
®
Talk software are summarized in
Recommended
personal computer with
80486 or Pentium
processor
RAM:
16MB
Harddisk: 8MB
SVGA graphic card and
17" monitor
Windows 3.1
Windows 3.11
Windows 95
Windows NT 3.51
Windows NT 4.0
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

MagnetPE

Table of Contents