Line Card Leds - Cisco Catalyst 9600 Series Hardware Installation Manual

LEDs
LED type
SYSTEM
ACTIVE

Line Card LEDs

Table 13: Line Card LEDs
LED type
BLUE BEACON
PORT LINK
LED Position or Colour
Green
Amber
Red
Green
Amber
Blinking Amber
LED Position or Colour
Blue
Green
Blinking Green
Amber
Off
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
Meaning
Indicates that the environmntal monitors are normal.
Indicates a minor fault such as partial power supply
or fan failure.
Indicates a major fault. For example, situations where
the temperature of the supervisor module exceeds the
critical threshold.
Indicates that the supervisor module is operational
and is functioning as the active supervisor (in
redundant supervisor module configurations).
Indicates one of the following:
• ROMMON mode
• Supervisor module is functioning as the standby
supervisor (in redundant supervisor module
configurations)
Indicates Graceful Insertion and Removal (GIR) of
the module.
Meaning
Module is receiving beacon signal.
Port link is up but there is no packet activity.
Port link is up and indicating packet activity.
Port link is disabled, that is, administratively down.
No signal is detected, the link is down, or the port is
not connected.
Line Card LEDs
99