096: Rotary Speaker Od (Rotary Speaker Overdrive) - Korg Triton Studio Parameter Manual

Input Level Dmod [%]
Sets the modulation amount of the input level
h
Src
Selects the modulation source for the input level
Spread
i
Sets the width of the stereo image of the effect sound
Wet/Dry
Sets the balance between the effect and dry sounds
Src
j
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
b: L/R Pitch
When you select Up/Down for this parameter, the pitch shift
amount for the right channel will be reversed. If the pitch shift
amount is positive, the pitch of the left channel is raised, and the
pitch of the right channel is lowered.
096: Rotary Speaker OD
(Rotary Speaker Overdrive)
This is a stereo rotary speaker effect. It has an internal speaker
simulator that simulates overdrive (recreating the amp distor-
tion) and characteristics of the rotary speaker, producing a
very realistic rotary speaker sound.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Horn
Rotary Speaker
+
Overdrive
Rotor
Speaker Simulation
Right
D -mod
On/Off
D -mod
Mode Switch: Rotate/Stop
D -mod
Speed Switch: Slow/Fast
D -mod
Manual Speed Control
Overdrive
Switches overdrive on/off.
Src
a Selects the modulation source that switches overdrive on/off
Sw
Selects the switching mode of the modulation source that switches
overdrive on/off
Overdrive Gain
Determines the degree of distortion
b
Overdrive Level
Sets the overdrive output level
Overdrive Tone
Sets the tonal quality of overdrive
c
Speaker Simulator
Switches speaker simulation on/off
Mode Switch
Switches between speaker rotation and stop
Src
Selects the modulation source that toggles between rotation and
d
stop
Sw
Selects the switching mode of the modulation source that toggles
between rotation and stop
Speed Switch
Switches the speaker rotation speed between slow and fast.
Src
e Selects the modulation source that toggles between slow and fast
Sw
Selects the switching mode of the modulation source that toggles
between slow and fast
–100...+100
Fx:037,
Off...Tempo
Fx:037
–100...+100
Fx:043
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Wet / Dry
Mic Distance
Horn/Rotor
Balance Mic Spread
Wet / Dry
Off, On
Off...Tempo
Toggle, Moment
0...100
0...100
0...15
Off, On
Rotate, Stop
Off...Tempo
Toggle, Moment
Fx:040
Slow, Fast
Off...Tempo
Toggle, Moment
Fx:040
Horn/Rotor Balance
Sets the volume level balance between the high-range horn and low-
range rotor
f
ManualSpeedCtrl
Sets the modulation source in case the rotation speed is changed
directly
Horn Acceleration
How quickly the horn rotation speed in the high range is switched
g
Horn Ratio
Adjusts the (high-range side) horn rotation speed. Standard value is
1.00. Selecting "Stop" will stop the rotation
Rotor Acceleration
Determines how quickly the rotor rotation speed in the low range is
switched
h
Rotor Ratio
Adjusts the (low-range side) rotor rotation speed. Standard value is
1.0. Selecting "Stop" will stop the rotation
Mic Distance
Distance between the microphone and rotary speaker
i
Mic Spread
Angle of left and right microphones
Wet/Dry
Sets the balance between the effect and dry sounds
Src
j
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
a: Sw
This parameter determines how to switch on/off the overdrive
via a modulation source.
When "Sw" = Toggle, overdrive is turned on/off each time the
pedal or joystick is operated.
Overdrive will be switched on/off each time the value of
the modulation source exceeds 64.
When "Sw" = Moment, overdrive is applied only when you press
the pedal or operate the joystick.
Only when the value for the modulation source is 64 or
higher, the overdrive effect is applied.
Rotor, 1...99, Horn
Off...Tempo
Fx:040,
0...100
Fx:040
Stop, 0.50...2.00
0...100
Fx:040
Stop, 0.50...2.00
0...100
Fx:040
0...100
Fx:040
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
235