Tracks 1-8 Page; Tracks 9-16 Page; Song Select Page - Korg Pa50 User Manual

Bar number
This counter shows the current bar number position of the
selected Song.
A (S1:SongName)
Pressed a first time (with a Song already selected) this button
pair selects Sequencer 1. Pressed a second time (or with no
Song selected), it opens the Song Selection page (see "Song
Select page" on page 73), allowing for selection of a single
Song or a Jukebox file for Sequencer 1.
If you select another Song, while a Song is in play within the
same Sequencer, the new Song will start playing.
While this parameter is selected, you can select a Song by
composing its progressive number (see "Selecting a Song
composing its progressive number" on page 70).
B (S2:SongName)
Pressed a first time (with a Song already selected) this button
pair selects Sequencer 2. Pressed a second time (or with no
Song selected), it opens the Song Selection page (see "Song
Select page" on page 73), allowing for selection of a single
Song for Sequencer 2.
If you select another Song, while a Song is in play within the
same Sequencer, the new Song will start playing.
While this parameter is selected, you can select a Song by
composing its progressive number (see "Selecting a Song
composing its progressive number" on page 70).
C (Lyrics)
Open the Lyrics page (see "The Lyrics page" on page 74). Lyr-
ics will be shown only if included into the selected Song, and
compatible with a standard format that Pa50 can recognize.
E (Upper 1 Program), F (Upper 2 Program), G (Upper 3 Pro-
gram), H (Lower)
Name of the Programs assigned to the Realtime (Keyboard)
tracks. Use these buttons to select, mute/unmute or change
the volume of the corresponding tracks.

TRACKS 1-8 PAGE

To see and edit tracks 1-8, press TRACK SELECT from the
main page. The TRACK SELECT LED turns on.
Press the TRACK SELECT button twice, to go back to the
main page.
S1:MySong
Piano1
DkStrings
Legato
BrassyHorn
A-H (Tracks 1-8 Programs)
Name of the Programs assigned to tracks 1-8. Use these but-
tons to select, mute/unmute or change the volume of the cor-
responding tracks.

TRACKS 9-16 PAGE

To see and edit tracks 9-16, press TRACK SELECT once from
the Tracks 1-8 page, or twice from the main page. The
TRACK SELECT LED begins flashing.
Piano1
Guitar01
StrngEns2
VoxPad1
Song Play operating mode
Press the TRACK SELECT button again, to go back to the
main page.
S1:MySong
Strings1
DkStrings
Legato
BrassyHorn
A-H (Tracks 9-16 Programs)
Name of the Programs assigned to tracks 9-16. Use these but-
tons to select, mute/unmute or change the volume of the cor-
responding tracks.

SONG SELECT PAGE

This page appears when you press either the A (S1:) or B (S2:)
button while you are in the main page. You can also access the
Song Select page by pressing PAGE +.
Press EXIT (or PAGE-) to go back to the main page of the
Song Play operating mode, without selecting a Song.
Song Selection
CLUB
BALLADS
0001 MYSONG.MID
FD SELECT
While in this page, select a Song for the selected Sequencer, or
a Jukebox file for Sequencer 1.
Note: There is a separate working directory for each onboard
sequencer.
A-C (File, folder)
Move the ".MID", ".KAR" or ".JBX" file, or folder, to be
selected to the first line of the display. To select a file, press the
F2 (Select) button. To open a folder, press the F3 (Open) but-
ton.
The " " symbol identifies a folder.
E-F (Scroll Up)
Scroll the list up. Keep SHIFT pressed and press one of these
buttons to jump to the previous alphabetical section.
G-H (Scroll Down)
Scroll the list down. Keep SHIFT pressed and press one of
these buttons to jump to the next alphabetical section.
F1 (FD)
Press this button after replacing a floppy disk in the floppy
disk drive. The new floppy disk will be read, and the file list
shown on the display will be updated.
F2 (Select)
Selects the item on the first line in the display (Song or Juke-
box file). If a Song is already playing, it stops, and the new
Song starts playing. You are returned to the Main page.
73
Tracks 1-8 page
VocaEns
Bassi
StrngEns2
Strings2
|
|
OPEN CLOSE