7-28
Installing the Operating System Drivers
Limitations
The driver MUST be loaded by a BASEDEV= statement in the
CONFIG.SYS file. This statement is automatically inserted by the
ADDARRAY.CMD installation procedure.
When using the /V, verbose option, command line switch for this driver
in a system using OS/2 for SMP, the text is not reliably displayed.
Finally, proceed to the last section in this chapter, "Updating the Compaq
Insight Management Agents."
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: H-CH07.DOC Last Saved On: 11/3/98 9:51 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED