Rack Stability - Compaq Smart Array 221 User Manual

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the
!
equipment, be sure that:
Writer: Jocelyn Campitelli Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
Any surface or area of the equipment marked with these
symbols indicates the presence of a hot surface or hot
component. If this surface is contacted, the potential for injury
exists.
WARNING: To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Power Supplies or Systems marked with these symbols
indicate the equipment is supplied by multiple sources
of power.
WARNING: To reduce the risk of injury from electrical
shock, remove all power cords to completely disconnect
power from the system.
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single rack
installations.
The racks are coupled together in multiple rack installations.
A rack may become unstable if more than one component is extended
for any reason. Extend only one component at a time.
File Name: A-FRNT.DOC Last Saved On: 11/5/98 12:26 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Smart Array 221 Controller User Guide
xi