Compaq Smart Array 221 User Manual page 33

To run Options ROMPaq:
1. Place the Options ROMPaq diskette 1 in the server floppy drive.
2. Boot the server by turning on the power.
3. Press Enter at the Welcome screen.
4. At the Select A Device screen select:
ALL COMPAQ SMART-ARRAY 221 Controller(s)
from the list of programmable devices. Press Enter.
5. If the ROM firmware in the Smart Array 221 Controller is the same or
newer than that on the Options ROMPaq diskette, this message displays:
The ROM image files found for the device selected
are not newer than the current ROM image
Press Enter to go to step 9.
OR
If the ROM firmware in the Smart Array 221 Controller is older than that
on the Options ROMPaq diskette, the Select An Image screen displays:
Device to reprogram:
Current ROM revision:
Select Firmware Images:
Press Enter.
6. Review the information on the Caution screen:
Device to reprogram:
Current ROM revision:
Selected ROM revision:
7. Press Enter to reprogram the Smart Array 221 Controller ROM or Esc
to discontinue the reprogramming and return to the Select An
Image screen.
Reprogramming Firmware
indicates that the Smart Array 221 Controller ROM is being
reprogrammed. DO NOT INTERRUPT THIS PROCESS.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: D-CH03.DOC Last Saved On: 11/5/98 12:27 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
ALL COMPAQ SMART 221 Controller(s)
COMPAQ SMART 221 Controller x.xx
COMPAQ SMART 221 Controller y.yy
ALL COMPAQ SMART 221 Controller(s)
COMPAQ SMART 221 Controller x.xx
COMPAQ SMART 221 Controller y.yy
Compaq Smart Array 221 Controller User Guide
3-5