Sco Unixware 2.1 Or Later; Getting The Driver And Installation Information; Creating The Efs Diskettes - Compaq Smart Array 221 User Manual

7-18 Installing the Operating System Drivers

SCO UnixWare 2.1 or Later

Getting the Driver and
Installation Information
The instructions in this section can be used to retrieve the latest driver and
information necessary to install the initial driver for a new Smart Array 221
Controller installation or to upgrade the driver in an existing UnixWare
server/Smart Array 221 Controller system. If you use SmartStart to install
UnixWare and drivers on a new server, or to upgrade an existing server, you can
skip this section and you do not need to create the EFS diskettes
The latest drivers and support files for SCO UnixWare as well as information
about installing the driver is located on the Compaq SmartStart and Support
Software CD supplied with the Smart Array 221 Controller Option Kit. To
access these files you will need to create a set of Compaq EFS for SCO
UnixWare 2.1 diskettes from the Compaq SmartStart and Support Software CD.

Creating the EFS Diskettes

To create the Compaq EFS for SCO UnixWare 2.1 diskettes:
1. Boot the server from the Compaq SmartStart and Support
Software CD.
2. Select Create Support Software from the Compaq System Utilities screen.
3. Select Create Support Software Diskettes from CD only from the
Diskette Builder screen.
4. Scroll down the list and select Compaq SCO OpenServer 5 EFS.
5. Follow the instructions on the screen to create and label diskettes.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: H-CH07.DOC Last Saved On: 11/3/98 9:51 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED