Compaq Smart Array 221 User Manual page 56

Group physical drives of the same size
into an array
1. Click the Create Array... button. The Create Drive Array screen is
displayed.
Figure 6-4. Create Array screen
2. Select the six drives you want to make up the array from the drives on the
left. Always group physical drives of the same size. The Smart Array 221
Controller treats all the drives as the same size as the smallest drive in the
same array. If you mix drive sizes, the capacity of the largest drive is
wasted.
For this example select the following drives:
Port 1:SCSI ID 0
Port 1:SCSI ID 1
Port 1:SCSI ID 2
Port 1:SCSI ID 3
Port 1: SCSI ID 4
Port 1: SCSI ID 5
Click the Assign Drive(s) to Array button.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: G-CH06.DOC Last Saved On: 11/5/98 1:41 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Smart Array 221 Controller User Guide
6-7