Table of Contents
Advertisement
3.
Scroll down the list and select Compaq System Configuration Utility.
4.
Follow the instructions on the screen to create the utility diskette(s).
Starting the System
Configuration Utility
To start the System Configuration Utility:
1.
Place the Compaq SmartStart and Support Software CD in the server
CD-ROM drive.
or
Place the System Configuration Utility diskette 1 in the server
diskette drive.
2.
Reboot the server.
During the boot process, several messages display. Among these will be
a notice that one or more Smart Array 221 Controllers were detected.
3.
If prompted, press F1 to resume booting.
4.
If you are using the Compaq SmartStart and Support Software CD, select
Run the System Configuration Utility from the main menu screen.
5.
If you are given a choice of Auto Configuration, choose Yes.
6.
The system loads configuration files for all detected devices.
7.
In the Configuration Complete screen, be sure to choose Review or
Modify Hardware Settings.
From the next screen, Steps In Configuring Your Computer, select
Step 3: View or Edit Details.
8.
The View Or Edit Details screen is where you will set the Smart Array
221 Controller(s) configuration parameters. Scroll down to the option
slot for the first Smart Array 221 Controller and set each parameter
according to the information in the next section, Configuring the
Controller.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: F-CH05.DOC Last Saved On: 11/5/98 12:27 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Smart Array 221 Controller User Guide
5-3
Advertisement
Chapters
Table of Contents
