Compaq Smart Array 221 User Manual page 21

2-4 Installation Preparation
Compaq hard drives supported by the Smart Array 221 Controller
include:
2.1 GB Wide-Ultra SCSI hot plug
4.3-GB Wide-Ultra non hot plug
4.3-GB Wide-Ultra hot plug
4.3-GB Wide-Ultra 10k-II non not plug
4.3-GB Wide-Ultra 10k-II not plug
4.3-GB Wide Ultra2 non-hot plug
4.3-GB Wide Ultra2 hot plug
4.3-GB Wide Ultra2 10k-II non hot plug
4.3-GB Wide Ultra2 10k-II hot plug
9.1-GB Wide-Ultra non hot plug
9.1-GB Wide-Ultra hot plug
9.1-GB Wide-Ultra 10k-II non hot plug
9.1-GB Wide-Ultra 10k-II hot plug
9.1-GB Wide Ultra2 non hot plug
9.1-GB Wide Ultra2 hot plug
9.1-GB Wide Ultra2 10k-II non hot plug
9.1-GB Wide Ultra2 10k-II hot plug
18.2-GB Wide-Ultra hot plug
18.2-GB Wide-Ultra 10k-II non hot plug
18.2-GB Wide-Ultra 10k-II hot plug
18.2-GB Wide Ultra2 hot plug
18.2-GB Wide Ultra2 non hot plug
18.2-GB Wide Ultra2 10k-II non hot plug
18.2-GB Wide-Ultra2 10k-II hot plug
For the most current information, refer to
www.compaq.com/products/servers/storage.
Drives should be of the same capacity to provide the greatest storage
space efficiency when drives are grouped together into the same drive
array.
Except on hot-plug drives in ProLiant servers and storage systems, you
must manually set the SCSI ID on each drive to a unique value in the
range of 0 to 6 or 8 to 15 for each SCSI bus. Consult the documentation
that came with the drive for instructions on setting the SCSI ID.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: C-CH02.DOC Last Saved On: 11/5/98 12:27 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED