Smartstart And Support Software Cd; Storage And Options Documentation Library Cds; Hardware And Software Installation Guidelines - Compaq Smart Array 221 User Manual

2-2 Installation Preparation

SmartStart and Support Software CD

The SmartStart and Support Software CD contains the software to configure the
Smart Array 221 Controller and to install the operating system drivers.
Storage and Options Documentation
Library CDs
The Storage and Options Documentation Library CDs contain user
documentation that allows the user to view, search, and print information for
Compaq storage and option products.
Hardware and Software Installation
Guidelines
For first-time installations, the following steps must be performed in the order
listed. If you are upgrading from an existing SMART 2SL Array Controller, see
the following section, "Guidelines for Making Changes to Current Installation."
Step
1
2
3
4
5
6
IMPORTANT: If the controller is purchased separately, ensure that the
system will boot properly after Smart Array 221 Controller installation by
updating the server firmware before installing the controller board.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
Table 2-1
Smart Array 221 Controller Installation Steps
Function
Update the server firmware
Hardware installation and cabling
System Configuration
Decide on a fault tolerance method
Configure your drive arrays
Install drivers for your operating
system
File Name: C-CH02.DOC Last Saved On: 11/5/98 12:27 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Go to:
Chapter 3
Chapter 4
Chapter 5
Appendix E
Appendix C
Chapter 7