Completing The Installation - Compaq Smart Array 221 User Manual

Completing the Installation

1. Replace the access panel.
2. Reconnect any peripheral devices to the server.
3. Plug the AC power cord(s) into the server, then into a grounded AC outlet.
4. Turn ON any peripheral devices supported by the server.
5. Turn ON the server.
Hardware installation and cabling are complete. See Chapter 6 to configure your
server.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
WARNING: To reduce the risk of electric shock or damage to
the equipment:
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical
outlet that is easily accessible at all times.
Disconnect power from the server by unplugging all power
cords from either the electrical outlet or server.
CAUTION: To prevent the possible loss of data in systems using
fault-tolerance methods with external data storage, make sure
that the server is the first unit powered down and the last to be
powered back up. This will ensure that the system will not
erroneously mark the drives as "failed" and try to rebuild them.
File Name: E-CH04.DOC Last Saved On: 11/5/98 12:27 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Smart Array 221 Controller User Guide
4-7