Compaq Smart Array 221 User Manual page 34

3-6 Updating the Firmware
8. When Options ROMPaq is finished reprogramming the Smart Array 221
Controller ROM, press Enter if you wish to reprogram another Compaq
option. Repeat steps 4 through 7.
9. If you are finished with reprogramming options, press Esc to exit the
ROMPaq Utility.
10. Remove the Options ROMPaq diskette and reboot the server by cycling the
power (cold boot).
The Smart Array 221 Controller ROM has been updated; you can take
advantage of the new or increased capabilities, if any, available with the new
firmware.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
CAUTION: Do not interrupt this cycle. Interrupting the ROM
reprogramming will leave the firmware in an unknown state. If
this happens you may not be able to reprogram the ROM and the
Smart Array 221 Controller ROM may have to be replaced. You
will be notified when reprogramming is completed.
File Name: D-CH03.DOC Last Saved On: 11/5/98 12:27 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED