Table of Contents
Advertisement
7-12
Installing the Operating System Drivers
Installing the Compaq Smart Array 221 Controller
Driver After Windows NT Installation
Execute the Setup program in the root directory of the Compaq SSD for
Windows NT to install or update the driver. This installation program copies the
appropriate driver and configures the system to use this driver.
1.
Start Windows NT 3.5x and log in to an account with administrative
privileges.
2.
Insert the Windows NT SSDs, one at a time, into the diskette drive.
Select File → Run from the Program Manager.
3.
4.
Enter the following:
5.
The Setup program presents you with a list of drivers that can be
installed. Select Compaq SCSI Controllers Support - Install/Remove.
6.
Select Continue. In the SCSI Adapter Setup window, select Add. A
Setup dialog box displays asking you to confirm the addition of a SCSI
controller (adapter). Select OK.
7.
Scroll through the Adapter list and select Other.
8.
When prompted for the path to the SCSI Adapter files, enter:
Select Continue.
9.
Select Compaq Drive Array from the list of drivers to install. Select OK.
10. After the driver has been copied to the system, Setup returns to the SCSI
Adapter Setup dialog box. Compaq Drive Array should appear in the list
of installed SCSI controllers. Select Close.
11. Exit the program.
12. Remove the Compaq SSD for Windows NT from the drive, shut down
Windows NT, and reboot the server to load the driver.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
a:\setup
a:\scsi\array
File Name: H-CH07.DOC Last Saved On: 11/3/98 9:51 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Advertisement
Chapters
Table of Contents
