Compaq Smart Array 221 User Manual page 62

Menu Bar
The menu bar contains the following pull-down menus:
Controller - lets you perform tasks such as selecting a controller, saving
a configuration, creating an array, and exiting the program.
Array - lets you delete or change the capacity of an array, or create
logical drives.
Drive - lets you delete or change logical drives, assign physical drives to
arrays, and create online spares.
View - lets you switch between the Physical Drive View or the Logical
Drive View in the list box.
Help - lets you select the help contents, search, and other online help.
Controller Selection Box
The Controller Selection box is located in the top left corner of the main
configuration screen. When you select this, a drop-down box lists all the
controllers that are installed in the present system. You can select which
controller you would like to view or configure. The highlighted controller is
shown in detail in the View Configuration list box.
Figure 6-10. Controller Selection box
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: G-CH06.DOC Last Saved On: 11/5/98 1:41 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Smart Array 221 Controller User Guide
6-13